14m x 20ft - SHD - Low Profile
Fire Retardant, UV Stabilised, 610gsm PVC Covers
NZ Engineer Certified to 249kms p/h
Hot Dip Galvanised Frames
Professional H&S Certified Installers
UV Stabilised PVC Covers
AUS/NZS 1170.2:2011 Code Compliance
Rolled Structural Steel Frames
10 Year Full Warranty
All Products Supplied Complete
PS1 (generic) - Structural Drawings & Calculations - NZ Engineer Certified
Description: NZ Engineer Certified to comply with AUS/NZS 1170.2:2011 wind load ratings (“C” cyclonic) 249kms p/h
Featuring our lower profile of 4.140m high arch with 8 x 76mm diam @ 3.2mm gauge, rolled structural steel, double end braced portals and purlins of superior strength, providing a total height of 6.7360m (GP containers). Combining our highest level of specification with our industry-leading 610gsm, UV stabilised, Ripstop, PVC, bonded covers together with the best ratchet tensioning system, you’ll quickly discover that this is a significantly higher level of quality and durability.
You may install without consent but NZ Councils’ will require you to remove any non-certified shelter!
Dimensions: L 6.05m x W 14.120m x H 4.140m
Floor Area: 85.43m² (approx)
Frame construction: 76mm diam. 3.2mm gauge, hot dip galvanised structural grade steel
Roof material: 610gsm PVC, UV stabilised & fire retardant
Number of portals: 4
Number of purlins: 7
Double End Bracing: Yes
Anti Friction Felt Tape: Yes
Crate dimensions: 224cm x 73cm x 55cm (2)
- PS1, Full Structural Drawings & Certification Included Free (Shelter Properties)
• 10 Year Full Warranty
• Hot dipped galvanised structural grade steel frames
• UV stabilised & fire retardant, 610gsm PVC cover
• Waterproof strong PVC covers
• No interior wire bracing for maximum strength
• Fast & Easy to install &/or relocate
Our Super Heavy Duty (SHD) Container Shelters are NZ engineer certified to meet and comply with AUS/NZS 1170.2:2011 wind load ratings (“C” cyclonic) 249kms p/h and to withstand New Zealand’s variable weather conditions. We insist on using fully hot dip galvanised and rolled, 3.2mm gauge structural steel portals and Rip Stop, Heavy Duty, UV stabilised, 610gsm, PVC bonded covers – NOT 280gsm, polyethylene (PE) covers and nor are wire bracings required as with most others. When comparing our shelters please note the additional number of portals and purlins used which provide added strength, durability and of course safety. We truly believe there are no other products available that meet Container Shelters level of value, quality, serviceability and longevity.
Our full end walls and half end panels are optional for all shelters and now feature mechanical wind-up/down doors – not just zips like the others!
All of our products come with our industry leading 10 Year Warranty and complete, ready to assemble and include easy to read & follow comprehensive, assembly instructions.
Why would you risk buying any non-rated shelter or shed when a new Container Shelter costs less and will easily cope with the worst Kiwi weather event? We recommended our Super Heavy Duty range first for safety and usage in the Cook Strait region, Chatham Islands, Stewart Island, Fiji and the tropics. In fact, anywhere that has high wind velocity and even snow events. when you require superior protection for your investments!